
Please make sure the following items are included with your LCD Display. If any items are missing, contact your dealer. Contact a local dealer to buy optional items.

This stand is not for the Floor Standing Type.

Package Contents

Unpacking

LCD Display

Manuals


	Quick Setup Guide	Warranty Card (Not available in all locations)	User's Guide, MDC Software, MagicNet Software

Cables


	D-Sub Cable	Power Cord	Speaker Wire Cable

Sold separately


	Wall Mount KIT	Speaker Set	Stand KIT


	DVI Cable	LAN Cable	BNC Cable

Other


	Remote Control	Batteries (AAA X 2)	Cover-Hole


	BNC to RCA Adaptor Jack	Semi Stand

Front

	MENU	Opens the on-screen menu and exits from the menu or closes the adjustment menu.

	Navigate buttons (Up-Down buttons)	Moves from one menu item to another vertically or adjusts selected menu values.

	Adjust buttons (Left-Right buttons)/ Volume buttons	Moves from one menu item to another horizontally or adjusts selected menu values. Adjusts the audio volume.

	ENTER	Activates a highlighted menu item.

	SOURCE	Switches from PC mode to Video mode. Changing the source is only allowed for external devices that are connected to the LCD Display at the time. [PC] → [BNC] → [DVI] → [AV] → [S-Video] → [Component] → [MagicNet]

	PIP	Push the PIP button to turn the PIP screen On / Off. More than one PIP cannot overlap on screen as BNC and the component use the same terminal. PC AV / S-Video / Component Mode BNC AV / S-Video Mode DVI AV / S-Video / Component Mode AV / S-Video PC / BNC / DVI Mode Component PC / DVI Mode

	Power button	Turns the LCD Display On/Off.

	Power indicator	Shows PowerSaver mode by blinking green.

	Remote Control Sensor	Aim the remote control towards this spot on the LCD Display.

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods.

Rear

For detailed information concerning cable connections, refer to Connecting Cables under Setup. The LCD Display 's configuration at the back may vary slightly depending on the LCD Display model.


		POWER S/W ON [ \| ] / OFF [O] Switches the LCD Display On/Off.
		POWER IN The power cord plugs into the LCD Display and the wall plug.


		RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port
		DVI / PC IN [DVI(HDCP)] (PC Video Connection Terminal) Using a DVI Cable (DVI-D to DVI-D) - DVI mode (Digital PC)
		DVI / PC IN [RGB] (PC Video Connection Terminal) Using a D-Sub Cable (15 pin D-Sub) - PC mode (Analog PC)
		DVI / PC IN [PC/DVI/BNC AUDIO IN] (PC/DVI/BNC Audio Connection Terminal (Input))


		COMPONENT AUDIO IN [L-AUDIO-R] (Component Audio Connection Terminal (Input))
		BNC/COMPONENT OUT [R/PR, G/Y, B/PB, H, V] (BNC/Component Connection Terminal (Output)) BNC (Analog PC) Connection: connecting the R, G, B, H, V ports Component Connection: connecting the PR, Y, PB ports
		BNC/COMPONENT IN [R/PR, G/Y, B/PB, H, V] (BNC/Component Connection Terminal (Input))


		AV AUDIO IN [L-AUDIO-R] (LCD Display Audio Connection Terminal (Input))
		AV OUT [VIDEO] (VIDEO Connection Terminal): AV mode (Output)
		AV IN [VIDEO] (VIDEO Connection Terminal) (Input)
		AV OUT [S-VIDEO] (S-VIDEO Connection Terminal): S-VIDEO mode (Output)
		AV IN [S-VIDEO] (S-VIDEO Connection Terminal) (Input)
		EXT SPEAKER(8 Ω)[- - L - +, - - R - +] (EXT Speaker Connection Terminal)
		AUDIO OUT [L-AUDIO-R] (LCD Display Audio Connection Terminal (Output)) AUDIO OUT is the terminal for the PC sound output.

The number of LCD Display s that can be connected to loopout may differ depending on the cables, signal source etc. With cables where there is no degradation or signal source, up to ten LCD Displays can be connected.

		LAN (LAN Connection Terminal) MS Internet Explorer
		USB (USB Connection Terminal) Keyboard / Mouse, Mass Storage Device Compatible.

		Kensington Lock The Kensington lock is a device used to physically fix the system to something when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact the place of purchase.

See Connecting the LCD Display for further information regarding cable connections.

Remote Control

The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display , causing a malfunction due to interference with the frequency.

	ON / OFF
	MAGICNET
	MDC
	LOCK
	MagicNet buttons
	+100 -/--
	VOL
	MUTE
	TTX/MIX
	MENU
	ENTER
	P.MODE
	AUTO
	PRE-CH
	CH/P
	SOURCE
	INFO
	EXIT
	Up-Down Left-Right buttons
	S.MODE
	STILL
	FM RADIO
	P.SIZE
	SRS
	DUAL/MTS
	PIP
	SOURCE
	SWAP
	SIZE
	REW
	STOP
	PLAY/PAUSE
	FF

ON / OFF

Turns the LCD Display On/Off.

MAGICNET

MagicNet Quick Launch Button.

MDC

MDC Quick Launch Button.

LOCK

Activates or deactivates all function keys on both the remote control and the LCD Display except for the Power and LOCK buttons.

MagicNet buttons

- Used for MagicNet.

Alphanumeric: Used to enter the Internet address.
DEL : Functions as the backspace.
SYMBOL : Used to enter the symbols. (.O_-)
ENTER : Used to enter values.

+100 -/--

Press to select channels over 100.
For example, to select channel 121, press "+100", then press "2" and "1".

VOL

Adjusts the audio volume.

MUTE

Pauses (mutes) the audio output temporarily.
This is displayed on the lower left corner of the screen.
The audio resumes if MUTE or - VOL + is pressed in the Mute mode.

TTX/MIX

TV channels provide text information services via teletext.

MENU

Opens the on-screen menu and exits from the menu screen or closes the screen adjustment menu.

ENTER

Activates a highlighted menu item.

P.MODE

When you press this button, current picture mode is displayed on the lower center of the screen.

AV / S-Video / Component : P.MODE
The Monitor has four automatic picture settings that are preset at the factory.
Then push button again to circle through available preconfigured modes.
( Dynamic → Standard → Movie → Custom )

PC/DVI/BNC : M/B (MagicBright)
MagicBrightT is a new feature providing the optimum viewing environment depending on the contents of the image you are watching.
Then push button again to circle through available preconfigured modes.
(Entertain → Internet → Text → Custom )

AUTO

Adjusts the screen display automatically in PC mode.
By changing the resolution in the control panel, auto function is performed.

PRE-CH

Returns to the immediately previous channel.

CH/P

In TV mode, selects TV channels.

SOURCE

Changes the video source.

INFO

The current picture information is displayed in the top left corner of the screen.

EXIT

Exits from the menu screen.

Up-Down Left-Right buttons

Moves from one menu item to another horizontally, vertically or adjusts selected menu values.

S.MODE

When pressing this button, the current mode is displayed at the bottom centre of the screen.
The LCD Display has a built-in high fidelity stereo amplifier.
Then press the button again to circle through available preconfigured modes.
( Standard → Music → Movie → Speech → Custom )

STILL

Press the button once to freeze the screen. Press it again to unfreeze.

FM RADIO

Turns the FM Radio on/off.
In PC/DVI mode, sets the SOUND to FM Radio.
In general Video mode, selects FM Radio, and turns off the screen.
In areas where the signal is weak, noise may occur during FM radio broadcasts.

P.SIZE

Press to change the screen size.

SRS

SRS

DUAL/MTS

DUAL-
STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM MONO/NICAM STEREO can be operated depending on the broadcasting type by using the DUAL button on the remote control while watching TV.

MTS
You can select MTS (Multichannel Television Stereo) mode.

	Audio Type	MTS/S_Mode	Default
FM Stereo	Mono	Mono	Manual Change
	Stereo	Mono Stereo	Manual Change
	SAP	Mono SAP	Mono

PIP

Every time you press the button, a PIP screen appears.

SOURCE

Changes the source of the PIP window signal.

SWAP

Swaps the contents of the PIP and main image.
The image in the PIP window will appear on the main screen, and the main screen image will appear in the PIP window.

SIZE

Switches the Picture Size.

REW

Rewind

STOP

Stop

PLAY / PAUSE

Play / Pause

Fast forward